Gdalinfoのソースを表示
提供: OSGeo.JP Wiki
←
Gdalinfo
移動:
案内
、
検索
あなたには「このページの編集」を行う権限はありません。理由は以下の通りです:
この操作は、以下のグループに属する利用者のみが実行できます:
登録利用者
。
ページの編集を始める前にメールアドレスの確認をする必要があります。
個人設定
でメールアドレスを設定し、確認を行ってください。
このページのソースの閲覧やコピーができます:
※元のページは http://gdal.org/gdalinfo.html こちら lists information about a raster dataset ラスターデータセットについての情報をリスト表示する。 === 概要 (SYNOPSIS) === <pre> gdalinfo [--help-general] [-mm] [-stats] [-hist] [-nogcp] [-nomd] [-noct] [-nofl] [-checksum] [-proj4] [-mdd domain]* [-sd subdataset] データセット名(datasetname) </pre> ===解説 (DESCRIPTION) === The gdalinfo program lists various information about a GDAL supported raster dataset. gdalinfoプログラムはGDALがサポートしているラスターデータセットに関する様々な情報をリスト表示する。 '''-mm''' Force computation of the actual min/max values for each band in the dataset. ラスターデータセットの各バンドにおける最小値/最大値を表示する。 '''-stats''' Read and display image statistics. Force computation if no statistics are stored in an image. ラスター統計量を読み込み、表示する。統計量がラスタに埋め込まれていない場合は、統計量の算出を行う。 '''-hist''' Report histogram information for all bands. ラスターデータセットの各バンドにおけるヒストグラム情報を表示する。 '''-nogcp''' Suppress ground control points list printing. It may be useful for datasets with huge amount of GCPs, such as L1B AVHRR or HDF4 MODIS which contain thousands of them. ラスターデータセット内のGCP(Ground Control Points)リストを表示しない。 (このオプションは多数のGCP情報を持つL1B形式(AVHRR)やHDF4形式(MODIS)に有用であろう) '''-nomd''' Suppress metadata printing. Some datasets may contain a lot of metadata strings. ラスターデータセットに関するメタデータを表示しない。 (膨大なメタデータを含んでいるデータセットに有用) '''-noct''' Suppress printing of color table. ラスターデータセットのカラーテーブルを表示しない。 '''-checksum''' Force computation of the checksum for each band in the dataset. ラスターデータセット内の各バンドのチェックサムを算出する。 '''-mdd domain''' Report metadata for the specified domain '''-nofl''' (GDAL >= 1.9.0) Only display the first file of the file list. '''-sd subdataset''' (GDAL >= 1.9.0) If the input dataset contains several subdatasets read and display a subdataset with specified number (starting from 1). This is an alternative of giving the full subdataset name. '''-proj4''' (GDAL >= 1.9.0) Report a PROJ.4 string corresponding to the file's coordinate system. The gdalinfo will report all of the following (if known): *The format driver used to access the file. *Raster size (in pixels and lines). *The coordinate system for the file (in OGC WKT). *The geotransform associated with the file (rotational coefficients are currently not reported). *Corner coordinates in georeferenced, and if possible lat/long based on the full geotransform (but not GCPs). *Ground control points. *File wide (including subdatasets) metadata. *Band data types. *Band color interpretations. *Band block size. *Band descriptions. *Band min/max values (internally known and possibly computed). *Band checksum (if computation asked). *Band NODATA value. *Band overview resolutions available. *Band unit type (i.e.. "meters" or "feet" for elevation bands). *Band pseudo-color tables. === EXAMPLE === gdalinfo ~/openev/utm.tif Driver: GTiff/GeoTIFF Size is 512, 512 Coordinate System is: PROJCS["NAD27 / UTM zone 11N", GEOGCS["NAD27", DATUM["North_American_Datum_1927", SPHEROID["Clarke 1866",6378206.4,294.978698213901]], PRIMEM["Greenwich",0], UNIT["degree",0.0174532925199433]], PROJECTION["Transverse_Mercator"], PARAMETER["latitude_of_origin",0], PARAMETER["central_meridian",-117], PARAMETER["scale_factor",0.9996], PARAMETER["false_easting",500000], PARAMETER["false_northing",0], UNIT["metre",1]] Origin = (440720.000000,3751320.000000) Pixel Size = (60.000000,-60.000000) Corner Coordinates: Upper Left ( 440720.000, 3751320.000) (117d38'28.21"W, 33d54'8.47"N) Lower Left ( 440720.000, 3720600.000) (117d38'20.79"W, 33d37'31.04"N) Upper Right ( 471440.000, 3751320.000) (117d18'32.07"W, 33d54'13.08"N) Lower Right ( 471440.000, 3720600.000) (117d18'28.50"W, 33d37'35.61"N) Center ( 456080.000, 3735960.000) (117d28'27.39"W, 33d45'52.46"N) Band 1 Block=512x16 Type=Byte, ColorInterp=Gray
Gdalinfo
に戻る。
案内メニュー
表示
ページ
議論
ソースを表示
履歴
個人用ツール
アカウント作成
ログイン
案内
メインページ
最近の更新
おまかせ表示
ヘルプ
検索
ツール
リンク元
関連ページの更新状況
特別ページ
ページ情報